| CIRCUIT USBSERVOS CARD | VERSION 1.0 | CONNECTS TO: USB PORT | REQUIREMENTS ONE FREE USB PORT TO CONTROL UP TO 6 SERVO-MOTORS Y AND 4 ANALOGUE AXLES |
| ESQUEMA | PRINTED CIRCUIT BOARD (PCB) NO DISPONIBLE | GERBER FILES | |
| DIAGRAM THIS CARD MANAGES UP TO 6 SERVOMOTORS WITH 10 BITS OF RESOLUTION (0-1023 POSITIONS) IN ADDTION IT INCLUDES 4 ANALOGUE AXLES WITH 8 BITS OF RESOLUTION (0-255) WHERE TO CONNECT POTETIOMETRES. CARD IS CONTROLLED VIA SIOC PROTOCOL AND CAN BE PROGRAMMED USING A HIGH LEVEL LANGUAGE OR USING SIOC. THIS CARD IS PERFECT TO BUILD ANALOGUE GAUGES WITH LIMITED AND SMOOTH MOVEMENTSES DUE TO ITS 10 BITS RESOLUTION. ANY TYPE OF COMMERCIAL SERVO MOTOR CAN BE CONNECTED TO THIS CARD. | |||
| PURPOSE GENERALLY, TO BUILD ANALOGUE GAUGES LIKE FLAPS POSITION INDICATOR, VERTICAL SPEED INDICATOR, ETC. | |||
| HOW TO BUY IT HERE | PCB : YES ASSEMBLY KIT: YES CARD BUILT AND TESTED: YES | ||
| EXAMPLE OF USE HERE YOU HAVE SOME VIDEOS SHOWING GAUGES THAT USE SERVO MOTORS.
HERE YOU CAN SEE A FLAPS POSITION INDICATOR WITH TWO NEEDLES USING 2 SERVO MOTORS.
| |||
| TUTORIALS AND FILES: | |||
| |||
| CIRCUIT SERVO-MOTORS II CONTROLLER | VERSION 1.0 | CONNECTS TO: MASTER CARD OUTPUTS | REQUIREMENTS 16 OUTPUTS TO CONTROL 2 SERVO MOTORS |
| DIAGRAM | PRINTED CIRCUIT BOARD (PCB) | GERBER FILES | |
| DESCRIPTION THIS IS A CIRCUIT THAT MANAGES THE POSITION OF 2 SERVO MOTORS USING PWM (PULSE WIDTH MODULATION). CIRCUITO DECODIFIES THE VALUE GIVEN BY MASTER CARD AND SEND A PULSES CHAIN TO THE SERVO MOTOR. RESOLUTION IS 8 BITS (0-255 POSITIONS). CIRCUIT HAS TWO CONNECTORS, AND CONTROL IS MADE BY SOFTWARE. | |||
| PURPOSE GENERALLY, TO BUILD ANALOGUE GAUGES LIKE FLAPS POSITION INDICATOR, VERTICAL SPEED INDICATOR, ETC. | |||
| HOW TO BUY IT HERE | PCB : YES ASSEMBLY KIT: YES CARD BUILT AND TESTED: YES | ||
| EXAMPLE OF USE WITH THIS VIDEO YOU CAN SEE HOW THE PLANE MOVEMENTS CAN BE EASILY MANAGED USING SERVO MOTORS.
| |||
| TUTORIALS AND FILES: | |||
| |||
